Cold Sterilant

About Cold Sterilant

It is validated as a cold sterilant for reprocessing hollow-fiber dialyzers. Cold Sterilant is a proper mixture or hydrogen peroxide, peracetic acid and acetic acid. Formulated with Peracetic acid as primary active ingredient, this powerful solution, has been widely accepted by medical profession.

Advanced Features

• Cleans fibers well and also sterilizes and disinfect the dialyzer
• Enhance cleanliness
• Fully Disinfection
• 5 Liter can
• Uses in Hospital, Laboratory

Broad-spectrum, Fast-acting Sterilization

Formulated to eliminate a wide range of pathogens, this cold sterilant is effective against bacteria, viruses, fungi, and spores. Its contact time ranges from just 5 to 30 minutes, making it a reliable solution for routine and emergency sterilization needs in healthcare and laboratory environments.


Safe and Compatible with Medical Instruments

With a neutral to slightly alkaline pH and non-corrosive formula, this cold sterilant safely disinfects metal, glass, plastic, and rubber instruments. Its mild odor and low toxicity assure comfort and safety for healthcare professionals when used as per recommended guidelines.


Eco-friendly and Conveniently Packaged

Supplied in biodegradable HDPE packaging and available in various sizes, this portable solution supports environmental health while accommodating diverse operation sizes. Its long shelf life and simple storage requirements add convenience and reliability for busy facilities.

Also Known As: Cold Sterilant, Cold Sterilizing Solution, Chemical Sterilant Solution, Low Temperature Sterilant, Medical Disinfectant Sterilant, Instrument Sterilizing Solution, Cold Disinfection Solution, High-Level Cold Sterilant Solution

Esterilizante en frío, solución esterilizante en frío, solución de esterilización química, desinfectante esterilizante, solución de desinfección en frío, esterilizante de bajo temperatura, solución esterilizante de instrumentos, desinfectante de alto nivel en frío

Stérilisant à froid, solution de stérilisation à froid, solution stérilisante chimique, désinfectant stérilisant, solution de désinfection à froid, stérilisant à basse température, solution de stérilisation des instruments, désinfectant de haut niveau à froid

معقم بارد، محلول تعقيم بارد، محلول تعقيم كيميائي، مطهر معقم، محلول تطهير بارد، معقم بدرجة حرارة منخفضة، محلول تعقيم الأدوات الطبية، مطهر عالي المستوى بارد

Холодный стерилянт, раствор холодной стерилизации, химический стерилизующий раствор, дезинфицирующий стерилянт, раствор холодной дезинфекции, низкотемпературный стерилянт, раствор стерилизации инструментов, высокоуровневый холодный дезинфектант

FAQs of Cold Sterilant:

Q: How should the cold sterilant be used on medical instruments?

A: Immerse clean instruments fully in the cold sterilant solution, ensuring complete coverage. Allow the instruments to remain in contact with the solution for the recommended duration, typically between 5 to 30 minutes depending on the type of pathogen and sterilization protocol. Finally, rinse the instruments with sterile water before use.

Q: What types of pathogens does this cold sterilant eliminate?

A: This cold sterilant is highly effective against a broad spectrum of microorganisms, including bacteria, viruses, fungi, and even spores, making it suitable for high-level disinfection in critical healthcare settings.

Q: When is it appropriate to use this product for sterilization?

A: Use this sterilant whenever instruments or surfaces in hospitals, clinics, laboratories, or operation theatres require rapid, high-level disinfection, especially where heat sterilization is not feasible.

Q: Where can this cold sterilant be safely applied?

A: It is safe for use on metal, glass, plastic, and rubber medical instruments, as well as on external surfaces commonly found in healthcare facilities. Its formulation is non-corrosive and does not harm compatible materials.

Q: What are the benefits of using this cold sterilant over traditional methods?

A: This product offers fast action, broad-spectrum efficacy, safety for various materials, minimal odor, and convenience with ready-to-use packaging. Its low toxicity and biodegradable composition provide additional environmental and user safety benefits.

Q: What storage and handling instructions should be followed?

A: Store the cold sterilant in a cool, dry location away from direct sunlight. Always follow manufacturer guidelines for safe handling, use appropriate protective gear, and reseal containers after each use to maintain effectiveness and safety.